 |
Two Post Lift IME 300
Asymetric design gives maximum door opening
| |
IME 300/25 |
IME 300/30 |
 |
| max load: |
25 KN
(2500 kg) |
30 KN
(3000 kg) |
|
| lifting height: |
1990mm |
1990mm |
|
| lifting time: |
47 sec. |
47 sec. |
|
| overall height: |
2675mm |
2675mm |
|
| overall breath: |
3000mm |
3200mm |
|
| current need: |
3x380 / 220 V
50 Hz / 3 kW |
3x380 / 220 V
50 Hz / 3 kW |
|
| control mechanism: |
24 V |
24 V |
| |
| Lifting height 1990mm • Low profile • 6 roller bearings for smooth
operation • Automatic arm locking • Tools trays • Integral air and 240 V
facility • With base frame or baseless |
| |
| Integral air line facility • Continous lubrication of spindle and
nuts • Fully adjustable large diameter lifting pads • Four belt drive • 180o
swing on short arms • Extra lifting height • options: high lift pads |
| |
|
 |
Single Post Lift IME 200
Capacity 2000 kg • Repairs made easy
| capacity: |
2000 kg |
|
| lifting height: |
1900 mm |
|
| lifting time: |
45 sec. |
|
| electric: |
3 kW / 380 V |
|
| wave height: |
100mm |
|
| total length: |
1100mm |
|
| width: |
1840mm |
|
| height: |
2820mm |
| |
|
 |
Four post lift HVS 35
Capacity 3500 kg • Repairs made easy
| capacity: |
3500 kg |
|
| lifting time: |
35 sec. |
|
| max lifting height: |
1850mm |
|
| electric: |
380 V |
|
| pneumatic feed: |
4 - 8 bar |
|
| length of platforms: |
4700mm |
|
| width of tracks: |
490mm |
|
| total length: |
5700mm |
|
| width: |
3000mm |
| |
| accessories: • lighting kit • axle free lifter |
| |
|
 |
Scissor Car Lift HSH 40
Repairs made easy
| capacity: |
4000 kg |
|
| lifting time: |
40 sec. |
|
| max lifting height: |
1950mm |
|
| motor: |
380 V, 50 Hz, 3 kW |
|
| pneumatic feed: |
4 - 8 bar |
|
| control mechanism: |
24 V |
| |
Technical characteristics:
-
Hydraulic synchronism of the platforms without any track rod
-
Pricise notch-system guarantees optimal axial survey
-
Adjusting equipment
-
Surface and recessed installation possible
-
Device for hand lowering in case of power failure
|
| |
accessories:
-
Drive on ramps for installation over floor
-
Rubber block
-
Lighting set
-
Track extension 40cm
-
Hydraulic play detector
|
| |
|
 |
Scissor Lift DSH 30
Capacity 3000 kg • Repairs made easy
| |
DSH 30 E, K flush fitting |
DSH 30 R surface mounting |
|
| capacity: |
3000 kg |
3000 kg |
|
| lifting height: |
1990mm |
2165mm |
|
| lifting time: |
35 sec. |
35 sec. |
|
| electric: |
2.2 kW / 380 V |
2.2 kW / 380 V |
|
| pneumatic feed: |
6 - 8 bar |
6 - 8 bar |
|
| length of platform: |
1450 - 1750mm |
1450 - 1750mm |
|
| width of tracks: |
505mm |
505mm |
|
| total length: |
1560mm |
4000mm |
|
| width: |
2010mm |
1810mm |
| |
advantages:
-
adjustable platform 1450 - 1750mm
-
Secure rubber mounting platform and pads
-
DSH 30 K cassette version reduces installation
|
| |
|
 |
HZB In Ground Lifts
Capacity 2500 - 5000 kg • Repairs made easy
|
IME Autolift offers you the complete range of in-floor lifts for vehicle and
axle inspections, mechanical repairs, service work & exhaust fitting, body
repairs, AU II with lifting capacity 2500 - 5000 kg, the range can be used for
small cars upto light commercials.
All the IME AUTOLIFT in-ground offer:
-
medium pressure hydraulics, tested over 1000 times
-
ultra hard chrome plated tension security piston rods
-
smooth running
-
fast lifting time
-
enviromentally friendly hydraulic drive filled with biodegradable oil
-
complete synchronisation
-
all round wheel free access
-
long lasting
-
Ergonomical, saves time, saves money
-
satisfied employees are your profit
-
for inspection, service and mechanical repairs
-
the space saving in-ground lift offers maximum all round wheel free
accessability
-
flat 'drive on' pads
-
accessories:
support pads for light commercials
|
| |
|
 |
Drive On Ramp HEP 30/22
with track level integrated lift tables
for the complete vehicle
| |
HEP 30 |
HEP 30/22 |
|
| capacity: |
30 KN
(3000 kg) |
30 KN
(3000 kg) |
|
| capacity lifting table: |
|
22 KN
(2200 kg) |
|
| lifting height: |
1700mm |
1700mm |
|
| lifting height lifting table: |
|
335mm |
|
| lifting time: |
30 sec. |
30 sec. |
|
| total length: |
4350mm |
4350mm |
|
| total width: |
1980mm |
1980mm |
|
| length of tracks: |
4000mm |
4000mm |
|
| width of tracks: |
480mm |
480mm |
|
| space between tracks: |
850mm |
850mm |
|
| electric: |
3x380/200 V
50 Hz/1.5 kW |
3x380/220 V
50 Hz/1.5 kW |
|
| pneumatic feed: |
6 bar |
6 bar |
| |
-
no crossing beams
-
free passing
-
also for commercial vehicles
-
integrated lift tables
-
lift the complete vehicle
-
also usable outside and for steam cleaning
-
control box can be put anywhere
-
minimum space required
|
| |
|
 |
PROFI 2000
Capacity 2000 kg • Repairs made easy
• Optimal working position
| |
PROFI 2000 |
PROFI 2800 |
|
| length: |
2270mm |
2500mm |
|
| breadth: |
900mm |
980mm |
|
| ground clearance: |
140mm |
155mm |
|
| weight: |
280 kg |
350 kg |
|
| tilt max: |
25o |
25o |
|
| max tilting cap.: |
2000 kg |
2800 kg |
|
| lifting height: |
990mm |
1220mm |
|
| electrics: |
110/220 V |
110/220 V |
|
| motor: |
50/60 Hz 1.5 kW |
| |
|
new: mobile electro hydraulic car lift with mobile control box.
Adjustable telescopic arms. Wide feet on the frame of the lift make for extra
stability on any surface.
|
| |
|
 |
Mobile Lift HKB 20 (PLX)
Capacity 2000 kg • Repairs made easy
• Optimal working position
| capacity: |
2000 kg |
|
| min. height: |
140mm |
|
| max. height: |
980mm |
|
| electric: |
380 V |
|
| total width: |
920mm |
|
| total length: |
2694mm |
|
| weight: |
250 kg |
| |
-
optimal working position
-
ultra low profile
-
mobile, easy to move
-
total accessability under and around the vehicle
|
|
;)
;)
;)
;)
;)
;)
;)
;)
;)